Have Questions?
-
Guaranteed Fitment
Always the correct part
-
In-House Experts
We know our products
-
Added Value
Mounting, Balancing
-
Wordwide Delivery
We ship worldwide
BDS 5 Inch Lift Kit w/ Radius Arm
Improve the ride on your 23-24 Ford Super Duty diesel truck with this 5-inch radius arm lift kit from BDS Suspension. Designed to improve stance, performance, and capability, this kit includes everything necessary to set your truck up right with clearance for up to 37" tires.
Up front the lift kit includes diesel-specific Pro-Ride coil springs, heavy-duty replacement radius arms, forged drop pitman arm and track bar bracket for steering correction, sway bar relocation, brake line brackets and precision tuned nitrogen charged shocks.
In the rear this kit utilizes a high-strength fabricated lift block, longer u-bolts, brake line brackets and a matching set of NX2 Nitro or FOX Performance shocks.
HD Radius Arms
In place of the factory stamped steel radius arms BDS supplies a pair of high-strength tubular radius arms. These arms mount into the factory location and offer caster adjustment for a wide range of lift heights along with an OE-style rubber bushing at the frame mount for smooth, quiet, service-free operation.
Pro-Ride Coil Springs
A pair of full-length, diesel-specific, Pro-Ride coil springs are supplied to provide the correct lift height and smooth, predictable ride across various terrains.
Steering Correction
To optimize steering geometry once lifted, a forged drop pitman arm is used to minimize the steering angle and pair it with a heavy duty track bar drop bracket to keep them in phase through suspension travel while recentering the front axle.
Features & Benefits
- Easy, 100% Bolt-on installation
- Pro-Ride dual rate coil springs provide a remarkable ride through any terrain
- Heavy duty tubular steel radius arms that correct caster while maximizing ground clearance
- Track bar relocation bracket and pitman arm maintain proper steering angles for improved handling
- Fabricated steel blocks provide level stance from front to rear
- Standard NX2 Nitro shocks with vehicle-specific valving for better control
- Upgrade to FOX 2.0 Performance Series shocks for maximum performance on and off-road
Recommended Tires & Wheels
(Trimming may be required)
- 37 x 12.5 with 17 x 9 and 5 in. Backspace
- 37 x 12.5 with 18 x 9 and 5 in. Backspace
- 37 x 12.5 with 20 x 9 and 5 in. Backspace
Rear Lift Option
5 Inch Block
Some F250/350 factory options increase the main leaf pack count from 2 to 3 leaf's (this is for top overload options only). Be sure to verify which factory leaf spring configuration your vehicle has and choose the appropriate option.
Leaf Springs
- Reduces axle wrap and creates a more controlled and stable feel
- Multi-leaf progressive design for smooth ride
- Maintains factory payload weight ratings
- Anti-friction pads provide a smooth and quiet ride
Shock Option
NX2 Nitro Series
- Nitrogen-charged
- Twin-tube design
- 10-stage velocity-sensitive valving
- Dual-welded ends for increased strength
- 1-3/8-inch high-flow piston
- Self-lubricating seals
- Silver powder coat finish
FOX 2.0 Performance Series
- 2-inch Impact extruded aluminum body
- Internal floating piston (IFP) monotube design
- CNC machined 6061-T6 aluminum mounting ends
- Large 5/8-inch hard chrome plated heat-treated alloy steel shaft
- Race-developed high-flow piston design
- Application-specific valving to maximize performance
- Long-lasting clear anodized finish
FOX 2.5 HTO Series
- 2.5” Impact extruded 6061-T6 aluminum shock body
- Type II clear-anodized body plating
- High-flow velocity-sensitive damping
- 5/8” hard chrome shaft
- Internal floating piston (IFP)
- Hydraulic Top Out (HTO) piston
FOX 2.5 Performance Elite Series
- Increased off-road capabilities
- Easily adjust your shock for terrain, load and speed
- 2.5-inch Impact extruded aluminum body
- Massive 7/8-inch hard chrome plated heat-treated alloy steel shaft
- External reservoir design separates shock oil from the high-pressure nitrogen
- DSC - Dual Speed Compression Adjuster comes standard
- Fully serviceable for a lifetime of use
- 1-year Manufacturer's Warranty
IMPORTANT NOTES:
- Vehicles with radius arm mounted ride height sensors will require BDS123303.
- Ford recommends the replacement of the pitman arm nut after each time it has been removed.
- Use a small pitman arm puller to remove the drag link joint and steering stabilizer taper.
- If your truck is equipped with a 2-piece rear driveshaft, a Carrier Bearing Drop Kit may be required: BDS123402.
- Due to the taller factory ride height, Tremor models will not net full advertised lift height. Final ride height will be the same as standard models.
- Larger tires on stock wheel are not recommended due to interference with brake line, radius arm and sway bar. Use recommended specs listed in wheel and tire fitment section.
- Minor trimming may be necessary for clearance of 37x12.50 tires on certain wheel setups.
- Installation requires a torque wrench capable of 406 ft-lbs.
- Vehicles with leaf spring ride height sensors must select the rear block option.
Installation Guides :
Est. Install Time :
6-8 hrsDifficulty Level :
DifficultSpecialty Tools Needed :
Torque Wrench, Die Grinder, Pitman Arm PullerOrder processing times
Most orders will be processed in up to 72 hours. During seasonal times such as Black Friday, order processing time can take up to 5 business days. We appreciate your patience as we prepare your order.
Shipping times
Shipment dates & lead times will vary based on product availability, product may not be in stock. If you have a question regarding availability please email or call the office to discuss lead times. By completing payment, you have acknowledged the terms and conditions stated. As stock changes daily, we do not hold inventory, first come, first serve.
Currently some brands are experience major delays - contact us or more information.
Local pickup
We currently offer free pickup from our location. You will be notified via email or phone when your item(s) are ready for pickup.
Returns
We will accept returns within 30 days of original purchase and provide a store credit ONLY, no cash or credit card refunds will be given. All returns are subject to a 20% restocking fee. The product must still be in the original clean packaging, unused and uninstalled. We do not refund shipping and handling charges and the customer is responsible for all return shipping charges. There will be an additional rebox fee charged if the packaging needs to be replaced so please double box your returns. There is no returns of special order, tuners or custom parts.
Cancellations
Custom parts may not be canceled once your order is placed. Cancelled Orders may be subject to a 15% cancellation fee. All returns must be pre-authorized with a Battle Born Offroad Employee and have an RGA # or they will be returned to you. Refunds will be processed within 48hrs once product is received and in original condition. Most refunds are issued to the original payment method, or by check. Please allow up to 7 business days for store credit to reflect.
Website errors
In the event a product is listed at an incorrect price due to typographical, photographic, or technical error or error in pricing information received from our suppliers, Battle Born Offroad Ltd shall have the right to refuse or cancel any orders placed for product listed at the incorrect price.
Payment processing
By clicking checkout, you agree to have your payment ran anytime after checkout. Some orders may not be charged right away, and you authorize Battle Born Offroad to charge your card up to 365 days after completing your purchase for the maximum amount you paid.
SOME ORDERS DO NOT SHIP RIGHT AWAY
Most Orders will ship within 72hrs. Some parts may not in stock and may incur a 1-52 week time due to limited availability. If you want to check the most up to date lead times on any of these products please email us at info@BattleBornOffroad.net